IInstallation Instructions | Product Maintenance & Important Info | Product Service Info
Customer Satisfaction is our number one priority so please do not hesitate to contact us with any questions or concerns.
If you have an issue with the SpecOps NRS, please contact Knoxx Industries with your questions or service needs. DO NOT contact the firearm manufacturer or your retailer for service. Contacting Knoxx Industries directly will expedite your service. Many times your issue can be resolved quickly and easily over the phone. For product service and repair please contact Knoxx Industries Customer Service at (805) 227-4099. All product repairs require a Return Merchandise Authorization Number (RMA#) prior to service.
ATTENTION: Read and follow all instructions and warnings prior to installation and/or firing a SpecOp equipped shotgun. Take extra time to review the shooting tips & techniques section of this manual. If you are at all unsure of your ability to install your SpecOps NRS safely, please seek the services of a competent gunsmith.
 WARNING 1: Before beginning stock installation, make sure that the shotgun is UNLOADED. Carefully check the chamber and magazine tube making both visual and touch verification.
WARNING 2: The Knoxx SpecOps NRS is NOT compatible with the Mossberg 590 DA. Use of the SpecOps NRS with the Mossberg 590 DA will cause product failure and possible injury.
WARNING 3: Remington 870 SpecOps NRS CAN NOT be used with oversized or extended safeties. Oversized or extended safeties will cause product failure and possible injury. Contact Knoxx customer service for recommended safety options.
NOTICE: The SpecOps NRS is not compatible with the FN "Tactical" Shotgun. Prior to installing a SpecOps NRS the "Tactical" trigger group must be replaced with a standard Winchester 1300/FN Police trigger group. Contact Winchester or FN for replacement trigger group.
• Socket Wrench, Long Extension and Sockets
• Medium Phillips Screwdriver
• Large Flat Blade Screwdriver
•Extended “Ball End” Allen Wrench
Remington 3/16” (SAE) - Moss., Win., FN 1/4” (SAE)
Allen wrench is available from Knoxx
• Blue Loctite #242
|
