IInstallation Instructions | Product Maintenance & Important Info | Product Service Info
Customer Satisfaction is our number one priority so please do not hesitate to contact us with any questions or concerns.
If you have an issue with the Rifle CompStock, please contact Knoxx Industries with your questions or service needs. DO NOT contact the firearm manufacturer or your retailer for service. Contacting Knoxx Industries directly will expedite your service. Many times your issue can be resolved quickly and easily over the phone. For product service and repair please contact Knoxx Industries Customer Service at (805) 227-4099. All product repairs require a Return Merchandise Authorization Number (RMA#) prior to service.
ASSEMBLY INSTRUCTIONS
Your new stock is designed for "drop in" installation for all factory firearms; although, due to manufacturing variations in firearms, it is possible for a rifle to exist that will require some minor fitting. A competent gunsmith should do this. If you have any problems installing your OverMolded™ Series Rifle Stock, please call us at (805) 227-4099. We will be glad to help make sure your stock fits perfectly. The CompStock™ assembly has been factory installed by Knoxx Industries and is ready to use. There are no adjustments needed and the unit will function properly with all calibers and loads. No maintenance is required.
1. Before starting to work, MAKE SURE THE RIFLE IS UNLOADED.
2. Hinge open the floorplate. Identify if your rifle has two or three screws. Remove screws from the trigger guard/magazine area.
3. Carefully wiggle and remove the trigger guard and floorplate (these parts may be one piece on some rifles). The action and magazine will now be free from the stock. The action will come straight out the top.
4. Reinstall action into your new Hogue stock. The magazine may be inserted into the bottom after the action is in place; make sure it is front-forward. Carefully position the trigger guard and floorplate into the corresponding inlets in the stock. These parts will need to be aligned so that they fit properly together. If they don't immediately fit flush, it may be necessary to position the magazine box with your fingers.
5. Reinstall the screws into their appropriate holes. Before tightening the front and rear screws, hinge the floorplate close, making sure it has proper clearance to operate. You may need to exactly position the parts before fully tightening the screws.
|
