KNOXX RIFLECOMPSTOCK
IInstallation Instructions | Product Maintenance & Important Info | Product Service Info

Product Maintenance:

Do not attempt to disassemble or adjust any of the recoil mechanisms. The internal springs have a 40,000+ round life expectancy and should not require replacement.

As part of regular firearm maintenance apply a small amount of "plastic safe" lubricant (not WD-40) to metal and moving surfaces. Very little lubrication is required so use sparingly (1-2 drops). Do not apply lubricants to other areas of the stock. Stocks subjected to extremes in humidity, sand, dust, or temperature should be cleaned regularly (Use compressed air if available) and lubricated with the appropriate lubricants for the environment. If the stock is submersed in saltwater, it should be thoroughly rinsed in clean water and dried thoroughly (Use compressed air if available). The exterior of the stock may be wiped clean with a cloth and cleaning products safe for plastics.

IMPORTANT INFORMATION ABOUT YOUR KNOXX/HOGUE RIFLE STOCK
Your Hogue Stock should only be used with the specific rifles for which it was designed. Before installing your new stock, be sure your gun is unloaded and that you follow the assembly instructions provided with this product. Check all functions of your gun after the stock is installed. If you do not feel competent to check the proper function yourself, have your gunsmith check this for you. Finally, be certain it functions properly and you can handle the gun safely.

All firearms are potentially dangerous; their use may cause great harm, personal injury or death. It is your responsibility to know the safe use, procedures and operation of your firearm, and to store, handle and transport your firearm safely. Proper training is available through accredited firearm safety training programs.