|
|
IInstallation Instructions | Product Maintenance & Important Info | Product Service Info | Download Owners Manual
COMPSTOCK INSTALLATION INSTRUCTIONS PART 2
1. Remove original stock. Refer to manufacturer’s instructions for the best method to remove stock. Normally the pad is held in place by two Phillips screws and the stock is held on by one bolt. Remove the pad by unscrewing the Phillips screws and remove the stock bolt to free the stock from the shotgun. (Fig. 1) Remove any metal spacers that remain.
2. Attach new CompStock butt stock in reverse manner utilizing a socket wrench, long extension and appropriate size socket (Remington - 7/16", Mossberg, Winchester & F/N - 1/2") . Use any enclosed bolts and washers to attach the new CompStock butt stock. (Attention Mossberg owners: utilize original factory bolt with the enclosed washer) Tighten bolt with a moderate to high degree of torque. (Fig. 2)
|
|
|
