|
|
IInstallation Instructions | Product Maintenance & Important Info | Product Service Info | Download Owners Manual
COMPSTOCK FOREND INSTALLATION INSTRUCTIONS
Refer to manufacturer’s instructions that came with your gun for the best method to remove your forend. Shotguns generally have some type of retaining nut that must be removed to free the barrel and another to free the forend. (Fig. 7)
- Remove the barrel retention nut.
- Remove barrel from action.
- Remove forend nut by turning with appropriate tool.
- Forend will now slide freely off and detach from slide handle.
- Slide new forend back onto slide handle. Reassemble in reverse order tightening the nuts according to the manufacturer’s recommendations.
 WARNING: Sling Swivel Stud - Do not install or relocate a sling swivel stud into the hole on the bottom of the stock. Doing so will damage the CompStock Mechanism and interfere with the function of stock. If a sling stud is not already pre-installed, a stud may be installed 1.25 inches forward of the existing hole.
|
|
|
