KNOXX AXIOM V/S RIFLE STOCK
IInstallation Instructions | Product Maintenance & Important Info | Product Service Info | Download Owners Manual

PRODUCT OPERATIONAL INFORMATION:

To extend the Stock, grasp the release lever located on the bottom side of the stock. Squeezing the lever releases the lock and allows the stock to slide freely to the desired position. The lock will automatically engage at each position.(Fig. A)

Note: Prior to shooting, always verify that stock is properly locked in the selected position.

To remove Axiom V/S Buttpad, insert small diameter Phillips screwdriver (#1) into the holes located in rubber buttpad. Remove both the buttpad and adapter plate.(Fig. B)

Note: Removing buttpad will reduce minimal length of pull.

IMPORTANT INFORMATION ABOUT YOUR KNOXX STOCK
This Knoxx stock should only be used with the specific rifle for which it was designed. Before installing the new stock, be sure that the gun is unloaded and follow the assembly instructions provided with this product. Check all functions of the gun after the stock is installed. If you do not feel competent to check the proper function yourself, have a gunsmith check this for you. Before using the stock in the field, it is important to test-fire the gun after installation to be certain it functions properly.

All firearms are potentially dangerous; their improper use may cause great harm, personal injury or death. It is your responsibility to know the safe use, procedures and operation of your firearm, and to store, handle, and transport your firearm safely. Proper training is available through accredited firearms safety training programs.